|Temperature Of Media:||Normal Temperature||Application:||General|
|Standard Or Nonstandard:||Stanard||Size:||Standard Size|
|Connection:||Female-Female||Working Pressure:||-10°C To 120°C|
|Body Material:||Brass||Color:||Customer's Request|
|Medium:||Water Oil Gas||Working Temperature:||-20℃-100℃|
Brass 3 Way Electric Ball Valve,
Ac220v 3 Way Electric Ball Valve,
Automatic In One Electric Ball Valve
2 Or 3 Way 3 Wire 2 Control Ac220v Internal Thread Screw Manual Automatic In One Electric Ball Valve
★Introduction –This series is a self-checking intelligent electric ballvalve. It is suitable for on-off control in heating systems and air-conditioning fan coil systems. It consists of aball valve and an actuator. The actuator drives the valveball to rotate 90°. The actuator is driven by asynchronous motor and built-in limit contacts, which can make the valve power off when the valve is fully open orfully closed, and the action is stable. LED lights are used to indicate the exterior, and the red and green lightsare switched to determine whether the valve is normallyopened or closed to achieve the self-check function. (Whenthe valve is fully open, the red light is off and the green light is on. When the valve is fully closed, the green light is off and the red light is on. If the valve is not fully opened or closed, the red and green lights areon at the same time. Maintenancepersonnelonlyneedtolookatthelighttoknow the problem. It is more suitable for installation and use in narrow, dark and inconvenient places for maintenance. For example, installation and use at the waterway control at the end of the central air conditioner).
★Function –Analog quantity regulation for liquid, gas and wind system pipeline medium flow;In the control of large valves and wind systems, electric valves can also be used for two-position switch control.
★Application– Canning / bottle system, beer brewing and beverage technology chemical industry, fluid mixing device, food industry concrete and cement industry, vacuum technology, water treatment device, pneumatic device, laundry room, medical equipment, boiler feed water, process control and other fields
1, This valve is mainly used to adjust the water flow. Please make sure that the direction of the water flow in the valve body is correct when installing.
2, Confirm that the connected voltage meets the requirementsof the driver.
3, The connected line meets the requirements of the site and is wired by professional technicians.
4, When installing or repairing, cut off the power supply to prevent damage to the equipment or electric shock.
5. Please make sure that the water quality in the pipeline meets the air-conditioning pipeline water standard.
6. Before leaving the installation site, you should observe at least three complete operating cycles of the driver. If the installation or wiring is correct but the driver does not work properly, you need to change the driver or contact the nearest supplier.
|Temperature Of Media||Normal Temperature|
|Certificate||ISO9001 2015 CE|
|Standard Or Nonstandard||Standard|
|Name||Electric Two Way Ball Valve|
|OEM||TMOK Or Professional OEM|
|Working Medium||Air Water Gas|
Contact Person: Cindy