|
Product Details:
|
| Application: | General, Garden,Bathroom,Kitchen,Factory And Other | Material: | Brass |
|---|---|---|---|
| Temperature Of Media: | Medium Temperature | Pressure: | High Pressure |
| Power: | Manual | Media: | Water |
| Port Size: | 1/2"-3/4" | Structure: | BALL |
| Port: | Ningbo/Shanghai | Body Material: | Cw617n, Hpb57-3, Hpb58-4 |
| Certificate: | ISO9001:2008 / CE | Surface: | Nickel,chrome Plated Or Nature |
| Thread&Connection: | G(BSP/BSPT),NPT | Handle: | Stainless Steel/Iron/ Aluminum Handle |
| Treatment: | Polishing,Forged,Blasting,Plating | Technology: | Forging |
| Working Medium: | Air,Water,Gas,Oil | Standard Or Nonstandard: | Standard |
Ball valve installation&application instruction
1.Range of application
The ball valve is mainly used for cutting off, distributing and changing the direction of the flowmedium in the pipeline. To prolong the service life of the ball valve, full open and full close are highlysuggested.
2.Main technical parameters of the product
2-1. we select high quality cooper material and apply hot forging process in the production process.2-2. The main working medium are wter,il,gas,etc.
2-3. working temperature range from -10'Cto 120C
2-4. each nominal working pressure of our ball valve are 2. 5Mpa,2.0Mpa and 1.6Mpa
3.Installation manual
3-1. For pipe thread connection type ball valve,we should make sure the pipe being vertical againstthe end surface of the valve body when tighten the connection part.our special warning is that weshould only wrench the octagonal at the same end of body instead of the other side to avoid
deformation so as to affect its normal open function.
3-2. For internal thread type ball valve,we should control the length of the external thread at the pipeend in case deformation of the valve body caused by the external thread's aqueezing the surface ofthe internal thread so as to affect leakproofness
3-3. When connecting the pipe thread type ball valve with pipe thread,the internal thread can beeither tapered pipe thread or cylindrical pipe thread,but the external thread must be tapered pipethread,otherwise it will cause leakage due to loose connection.
3-4. When intallilgn the pipe thread type ball valve,the sealing material must be clean.
3-5. Such obstacles as wall,coupling nut and pipe should not be placed inside the open/close range .3-6. When the ball valve handle is parallel to the body,it is open,otherwise,it is close.
3-7. The working medium should not contain particles,corrosive gas or liquid
3-8. PP-R ball valve installation instruction:
3-8-1. Remove the coupling nut,PP-R pipe and O-ring from the valve body
3-8-2. Pull the coupling nut on the pipe in the original direction
3-8-3. join the PP-R flange with PP-R pipe with a hot fusion machine.Pull the O-ring in thePP-R flange when it cooled down.Last,tighten the coupling nut with valve body.
1/2" Male Thread M/M Stop Self Closing Delay Water Pipe Angle Valve with Brass Seat
| Application | General, Garden,Bathroom,Kitchen,Factory And Other |
| Temperature Of Media | Medium Temperature |
| Power | Manual |
| Port Size | 1/2"-3/4" |
| Port | Ningbo/Shanghai |
| Certificate | ISO9001 2008 / CE |
| Thread&Connection | G(BSP/BSPT),NPT |
| Treatment | Polishing,Forged,Blasting,Plating |
| Working Medium | Air,Water,Gas,Oil |
| Material | Brass |
| Pressure | High Pressure |
| Media | Water |
| Structure | BALL |
| Body Material | Cw617n, Hpb57-3, Hpb58-4 |
| Surface | Nickel,chrome Plated Or Nature |
| Handle | Stainless Steel/Iron/ Aluminum Handle |
| Technology | Forging |
| Standard Or Nonstandard | Standard |
more models
Q.How to request a manufacturing quote from TMOK?
A.Simply call or sand us E-mail with your purchase request.Be sure to include all accessories in your request for quote.
Q.What are your quality control procedures? A.TMOK adheres to strict quality control procedures that begin with product design and carry through to the end of the
production process using state-of -the-art quality control equipment .As an added measure,all clients receive production
samples for approval.
Q.How are orders packed and shipped? A.For custom order,TMOK can design full-color custom packaging to match your brand ,if requires .Most shipments
include boxes packed inside an outer carton and placed on a wooden pallet.
Q.Are there any special requirements for OEM purchases? A.Yes.TMOK requires proof of trademark registration in order to print or emboss your trademark onto the product or
packaging.
Q.Do TMOK products come with a warranty? A.Yes.TMOK backs our products100%.That's why we offer 3-year product life guarantee ,and a generous1 year
warranty on al purchases that begins with the bill of lading.
| Product Line Name | Production Line Capacity | Actual Units Produced(Previous Year) |
|---|---|---|
| Brass valve, Bibcock | USD 800,000 Per Month | USD 6,000,000 |
| Market | Revenue(Previous Year) | Total Revenue (%) |
|---|---|---|
| South America | USD 1,200,000 | 20.0 |
| Eastern Europe | USD 1,200,000 | 20.0 |
| Southeast Asia | USD 300,000 | 5.0 |
| Africa | USD 300,000 | 5.0 |
| Mid East | USD 1,200,000 | 20.0 |
| Western Europe | USD 1,800,000 | 30.0 |
| Machine Name | Brand & Model No. | Quantity | Number of Year(s) Used | Condition |
|---|---|---|---|---|
| Cutting machine | SL-2550D | 2 | 6.0 | Acceptable |
| Punching machine | No information | 8 | 7.0 | Acceptable |
| Lifting type expansion tapping modular machine tool | RZT-6 | 6 | 6.0 | Acceptable |
| NC lathe | CK0632 | 33 | 7.0 | Acceptable |
| Meter lathe | No information | 15 | 7.0 | Acceptable |
| Assembly line | No information | 3 | 6.0 | Acceptable |
| Machine Name | Brand & Model No. | Quantity | Number of Year(s) Used | Condition |
|---|---|---|---|---|
| Pressure tester | No information | 8 | 5.0 | Acceptable |
| Product Line Name | Production Line Capacity | Actual Units Produced(Previous Year) |
|---|---|---|
| Brass valve, Bibcock | USD 800,000 Per Month | USD 6,000,000 |
| Market | Revenue(Previous Year) | Total Revenue (%) |
|---|---|---|
| South America | USD 1,200,000 | 20.0 |
| Eastern Europe | USD 1,200,000 | 20.0 |
| Southeast Asia | USD 300,000 | 5.0 |
| Africa | USD 300,000 | 5.0 |
| Mid East | USD 1,200,000 | 20.0 |
| Western Europe | USD 1,800,000 | 30.0 |
| Machine Name | Brand & Model No. | Quantity | Number of Year(s) Used | Condition |
|---|---|---|---|---|
| Cutting machine | SL-2550D | 2 | 6.0 | Acceptable |
| Punching machine | No information | 8 | 7.0 | Acceptable |
| Lifting type expansion tapping modular machine tool | RZT-6 | 6 | 6.0 | Acceptable |
| NC lathe | CK0632 | 33 | 7.0 | Acceptable |
| Meter lathe | No information | 15 | 7.0 | Acceptable |
| Assembly line | No information | 3 | 6.0 | Acceptable |
| Machine Name | Brand & Model No. | Quantity | Number of Year(s) Used | Condition |
|---|---|---|---|---|
| Pressure tester | No information | 8 | 5.0 | Acceptable |
| Products Name | MOQ(in the last 12month) |
|---|---|
| Brass valve | 3,000 PCS |
| Bibcock | 3,000 PCS |
| Products Name | Order(in the last 12month) |
|---|---|
| Brass valve | USD 160,000 |
| Bibcock | USD 160,000 |
| Products Name | Order(in the last 12month) | Shortest Lead Time |
|---|---|---|
| Brass valve | 3,000 PCS | 40 Days |
| Bibcock | 3,000 PCS | 40 Days |
| Certified Picture | Certification Name | Certified By | Certificate No. | Product Name & Model No. | Available Date --- Expired Date |
|---|---|---|---|---|---|
| CE | ECM | EC/1282/0D130731/YOV1870 | Brass Angle Valve CH & TK series | 2013/07/31-2018/07/31 |
Contact Person: Zoey
Tel: 15867061730
