|Temperature Of Media:||Normal Temperature||Pressure:||High Pressure|
|Port Size:||3/4"or 1"||Structure:||BALL|
|Port:||NINGBO/SHANGAHI PORT||Connection:||Female Thread,BSP|
|OEM:||TMOK Or Professional OEM||Working Temperature:||-20-120℃|
|Working Pressure:||Air Water Oil Gas||PN:||16|
|Standard Or Nonstandard:||Standard|
Four Way Brass Water Manifold,
1 2 in Brass Water Manifold,
1 2 inch pex manifold
3/4 Inch 1 Inch 2 Way 3 Way 4 Way Brass Water Manifold for Water Distributor
★Introduction –Water manifold refers to the device used to connect the main heating water supply pipe and return pipe in the floor heating system
★Working Principle– In the floor heating system, the water separator is mainly responsible for the opening and closing of the water flow in the floor heating loop. When the water in the gas boiler flows into the water manifold through the main pipe, the impurities are isolated by the filter, and then the water is evenly distributed to the loop. After heat exchange, it returns to the water collection back to the main bar, and then flows into the heating system from the water return port.
1. In the floor heating system, the sub-collector manages several branch pipes, and there are exhaust valves, automatic thermostatic valves, etc. installed on them, generally made of copper. The caliber is small, between DN25-DN40. There are many imported products.
2. In the air-conditioning water system, or other industrial water systems, it also manages a number of branch pipes, including the return water branch and the water supply branch, but the larger ones range from DN350-DN1500 and are made of steel plates. A professional manufacturer of pressure vessels needs to install pressure gauges, thermometers, automatic exhaust valves, safety valves, vent valves, etc. A pressure regulating valve needs to be installed between two containers, and an automatic bypass pipeline is required.
3. Tap water supply system, the use of water distributor effectively avoids the loopholes in tap water management, centralized installation and management of water meters, and the use of single pipe and multiple channels reduces the cost of pipe material procurement, and greatly reduces construction time and improves efficiency. The tap water dispenser is directly connected to the aluminum-plastic main pipe through different diameters, and the water meter is centrally installed in the water meter pool (water meter room), so that one meter per household can be installed outdoors and viewed outdoors. At present, household watch renovations are being carried out on a large scale across the country.
|Temperature Of Media||Normal Temperature|
|Port Size||3/4" or1"|
|OEM||TMOK Or Professional OEM|
|Working Pressure||Air Water Oil Gas|
|Standard Or Nonstandard||Standard|
Contact Person: Cindy